Uses

Waterborne Dense Stone Sealer is ideal for indoor / outdoor use on kitchens, bathrooms, entertainment areas, pool surrounds, patios, countertops, floors, walls, building facades, and for public / commercial areas.

Benefits

• Oil and water repellency for superior stain protection on dense surfaces such as marble and granite. Do not use on resined quartzite.
• Super penetration creates water and oil-repellency, which provides protection against stains and many other serious problems caused by water.
• Retains the appearance and color of the surface. (Test before as cream can slightly darken some substrates)
• Easy, one coat application.
• Makes surfaces easier to clean, keeping them looking new for longer.
• Breathable – water vapor escapes freely.
• Non-drip, waterborne cream. Great for vertical and smooth dense surfaces and floors, indoors or outdoors.
• LEED EQ Credit Conformance
• LEED NC 2.2 EQ Credit 4.2: Low-Emitting Materials references South Coast Air Quality Management District (SCAQMD) Rule 1113, Architectural Coatings, rules in effect on January 1, 2004.
• Permanent bonding silanes with 50% active ingredient – no annual resealing required.

How to use

1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24hr cure time to determine the ease of application and desired results. 
2. Surfaces to be treated must be dry, clean and free of residues, and surface temperature between 40 – 95°F (5 – 35°C). 
3. Apply Waterborne Dense Stone Sealer using a high density foam roller. One coat application only. The roller will leave the correct amount of sealer. Avoid contact with surrounding areas. 
4. Remove all excess cream with clean dry cloths (or squeegee) after a dwell time of 45 minutes to 1 hour. Failing to remove excess sealer after 1 hour will make surface slippery; removing excess sealer also becomes very challenging after 1 hour. View estimated application rates on page 2. 
5. Use fresh water to clean equipment. 
6. Avoid moisture contact with the surface for a minimum of 12 hours after application. 
7. To clean treated surfaces, use Stain-Proof Daily Countertop Cleaner, Daily Floor Cleaner or Stain-Proofs Alkaline Cleaner. 

• NOTE: Sealer will NOT prevent surface etching, scuffing or wear and may lighten or darken some surfaces.

Documents

• ↓ Waterborne Dense Sealer Specsheet
• ↓ Waterborne Dense Sealer PDF
• ↓ Dry-Treat Application Rates
• ↓ Dry-Treat Product Use & Porosity Chart