Applications

Porcelain & Quartz Sealer was specifically designed for porcelain and quartz surfaces.

Benefits

• Seals micro pores in polished porcelain and quartz surfaces
• Creates a unique molecular bond
• Permanent, long lasting protection
• Repels oil and water based stains
• Non-film forming and invisible
• Holds up to commercial cleaners and cleaning equipment
• Will not change the coefficient of friction (COF) of the surface
• Suitable for indoor, outdoor, residential and commercial use
• 10-Year Performance Warranty

How to use

1. TEST PRODUCT ON A SMALL INCONSPICUOUS AREA FIRST and allow a 24-hour cure time to determine the ease of application and desired results.
2. Surface must be dry, clean and free of residues.
3. DO NOT thin product.
4. Application rates: 400 – 500 sq ft/qt if sealing a finished, grouted installation or Quartz countertop.
5. Generously apply Porcelain & Quartz Sealer using low pressure hand sprayer or lambs wool applicator pad. Surfaces should have a mirror like ‘wet’ look for 30 seconds. Avoid contact with surrounding areas. Wait for approximately 15 minutes, but before the surface dries, then polish the surface thoroughly with clean, dry, micro fiber towels or similar, to remove any excess sealer. Moistening cloth with Porcelain & Quartz Sealer will ease polishing. Wait 12 hours to grout; this allows for the proper chemical bonding of Porcelain & Quartz Sealer to the porcelain’s surface. Once grout has cured, the second coat may be applied following the same techniques used for the first coat.
6. If sealing a finished and grouted installation or Quartz countertop, follow the application techniques listed in step #5, only applying one liberal coat of Porcelain & Quartz Sealer.
7. Use an organic solvent e.g. denatured alcohol to clean equipment.

NOTE: Sealer will NOT prevent surface etching, scuff marks or wear and may lighten or darken some surfaces. Spills should be cleaned up immediately to minimize absorption.

Storage

Keep container tightly sealed in a cool, well ventilated place. It is recommended that this product is best used within seven days of opening to avoid possible spoilage.

Documents

• ↓ Porcelain & Quartz Sealer PDF
• ↓ Porcelain & Quartz Sealer Specsheet
• ↓ Dry-Treat Application Rates
• ↓ Dry-Treat Product Use & Porosity Chart