Benefits

• Permanent premium oil and water repellence. 25-year written performance warranty when applied by a STAIN-PROOF Accredited Applicator.
• Three different custom sealing molecules for 3 levels of penetration and maximum stain repellence
• Includes a super penetrator for deep penetration of dense granites and marbles.
• Retains natural surface color and finish
• Super breathable: water vapor escapes freely preventing harmful moisture build-up inside the treated material
  Suitable for indoor, outdoor, residential and commercial use.

How to use

1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to determine the ease of application and desired results.
2. Ensure surfaces to be treated are dry, clean and free of residues.
3. DO NOT thin product.
4. Generously apply STAIN-PROOF™ Dense Stone Impregnating Sealer using a low-pressure hand sprayer, a clean brush or lamb’s wool applicator. Surface should have a mirror like ‘wet’ look for 3-5 seconds. Avoid contact with surrounding areas.
5. Wait for approximately 10 minutes but before the surface dries, repeat Step 4. Total application rate is approximately one pint for up to 75 sq.ft. (half liter per 7 square meters), depending on surface absorption. View our coverage chart for additional details.
6. After the final coat, wait approximately 10 minutes but, before the surface dries, polish with a clean dry white cloth to remove excess product, moistening cloth with STAIN-PROOF™ Dense Stone Impregnating Sealer to ease polishing.
7. Use an organic solvent e.g. methylated spirits to clean equipment.
8. Avoid moisture contact with the surface for six hours after application. Surface may be used after 24 hours with full cure up to 4 weeks.

• Sealer will NOT prevent surface etching, scuff marks or wear and may lighten or darken some surfaces.
• Dense Stone Impregnating Sealer will make the maintenance and cleaning of treated surfaces much easier.

Precautions

1. Do not take internally.
2. Apply when surface temperature is between 5 – 35°C (40 – 95°F).
3. Avoid moisture contact with the surface for six hours after application. Surface may be used after 24 hours with full cure up to 4 weeks.
4. Protect surrounding areas from over-spray.
5. Keep away from drains, plants, water and soil. Do not empty into drains.
6. Use only in well ventilated areas. Use a positive pressure respirator if ventilation is inadequate.
7. Wear suitable solvent resistant gloves, protective clothing, safety goggles and an organic vapor respirator during application.
8. Wash hands thoroughly after applying.

Storage

Keep container tightly sealed in a cool, well ventilated place. It is recommended that this product is best used within seven days of opening to avoid possible spoilage.

Documents

• ↓ Dense Stone Sealer Specsheet
• ↓ Dense Stone Sealer PDF
• ↓ Dry-Treat Application Rates
• ↓ Dry-Treat Product Use & Porosity Chart