Typical Applications

• All-natural stone (including acid-sensitive, calcite based stones such as marble and limestone)
• Porcelain, ceramic and clay tile
• Brick, masonry, concrete and grout
  Vinyl and unfinished wood (with no stain, oil or other coatings).

Benefits

• Triple action foaming cleaner – oxygen. alkaline and detergent booster. pH approx 11 for fresh product.
• Multi-use cleaner for heavy duty cleaning and removal of stains from oil, mold, food and beverage and leaf marks
• Can be used to make poultices for removing heavy, old, dried-in stains • 100% powder concentrate – use a single 2.2lb / 1kg bottle for heavy-duty cleaning of up to 500 sq ft / 50 sq m
• Breaks down odors
• Hyper-biodegradable – decomposes quickly into oxygen and natural minerals
• Safe to transport and gentler on skin than traditional alkaline / caustic / solvent cleaners

Application

1. TEST PRODUCT ON A SMALL AREA BEFORE FULL APPLICATION.
2. If satisfied with test results first sweep or vacuum all loose dust and dirt from the surface.
3. Apply when surface temperature is between 40 to 95°F (5 to 35°C).
4. Thoroughly wet the surface.
5. Stir in 1/3 of a bottle of Alkaline Cleaner into a open plastic bucket containing approximately 2 gallons / 8 litres of clean, warm water until it dissolves. Note: do not enclose mixed solution as container may rapidly expand and rupture and cause injury.
6. Apply solution generously to surface and leave for 3 minutes. Do not allow solution to dry on surface (clean large areas in sections). Gently scrub with white nylon scrub pad or brush.
7. Repeat application if required.
8. Rinse surface thoroughly with clean water.
9. One 2.2 lb / 1 kg bottle of Alkaline Cleaner cleans up to 500 sq feet / 50 sq metres.

Storage

Keep container tightly sealed in a cool, dry and well ventilated place.

Documents

• ↓ Alkaline Cleaner Specsheet
• ↓ Alkaline Cleaner PDF
• ↓ Dry-Treat Application Rates
• ↓ Dry-Treat Product Use & Porosity Chart

Video