Finishes
Balux Wood Finish
Wood finish, unpolished & unsealed
Balux Wood Finish
Balux Smooth Finish
Finishes
Balux Smooth Finish
→ Smooth, unpolished & unsealed concrete finish. (Could be sealed) **
Balux Slab Finish
→ Smooth, polished & sealed
Balux Industrial Finish
Finishes
Balux Industrial Finish
Industrial unpolished and unsealed finish.
Balux Encaved Finish
Finishes
Balux Encaved Finish
Smooth, unpolished, unsealed & encaved finish.
Bush Hammered
Finishes
Bush Hammered
Brush Hammered finish has a rough effect and a rugged touch, leaving the surface fairly smooth with small indentations. The process of this finish is created by a specialized stone-working hammer resembling a meat tenderizing hammer.
Bush Hammered & Brushed
Finishes
Bush Hammered & Brushed
Bush hammering and brushed is obtained by hitting the material surface mechanically or by hand with a specific multi pointed tool. This method creates a rugged surface full of little grazes at the impact points, and it modifies the color, making it lighter. The surface becomes non-slip. This technique has been replaced by flaming and pressure water finishing because these are faster and less costly.
Corteccia
Finishes
Corteccia
SPECIAL FINISH
Natural effect carved on stones and granites that recalls nature in its most rustic and wild form.
→ For wall & outdoor use
→ Rough to the touch
→ Best results on soft materials
Flamed
Finishes
Flamed
Flamed finish is the process when an intense flame is fired at the stone which causes the surface of the stone to burst and become rough. It enhances the natural seams of the stone giving it a surface roughness. This finished is used primarily for exteriors applications where slip resistance is extremely important. This finish cannot be applied to all stone however most granite and certain hard limestone are preferred.
Flamed & Brushed
Finishes
Flamed & Brushed
Passing a blowpipe that emits a high-temperature flame over the surface to be treated. The heat acts by blowing the crystals out as they suffer thermal shock, with an effect that is particularly evident in materials composed of minerals with various degrees of expansion, e.g., the vast majority of granites. The surface produced is rough and non-slip, and the color is generally faded, hiding defects and tone variations. Because of oxidation, yellow materials become orange or red.
Honed
Finishes
Honed
Buffed to a degree of smooth but dull appearance, honed finish leaves a surface smooth and refined. This finish exemplifies the stones natural character as it holds a low reflection and matte feature.
Juta
Finishes
Juta
SPECIAL FINISH
A brushed fabric effect obtained on the stone’s surface, giving a soft yet innovative look.
→ For outdoor & indoor
→ Depending on customer’s preference both strong & soft brushing is available.
Natural Cleft
Finishes
Natural Cleft
This is the a finish associated with materials that are layered and thus when Split with do so on a Natural Fault and create what is known as Natural Cleft Finish. Slates are the most common types of stone that can Naturally Split.
Neolith Boheme Finish
Finishes
Neolith Boheme Finish
NEOLITH SPECIAL FINISHES
Neolith Bohème Finish creates the natural look and feel of wood. Available now in Neolith La Bohème.
Neolith Decor Polished
Finishes
Neolith Decor Polished
Neolith Décor Polished stands out for its high degree of gloss with the help of a thin glass layer to create a perfectly linear reflective surface. This finish adds a touch of shine and depth. Unlike other Neolith finishes (known for its extreme resistance to scratches, abrasion and harsh chemicals), Neolith Décor Polished offers a more delicate texture to bring a high-class finish to design.
↓ Download Neolith Polished Finish Care Manual
Recommended use:
→ Countertops
→ Interior & Exterior Cladding
→ Interior Flooring (low foot traffic)
Neolith NanoTech Polished
Finishes
Neolith NanoTech Polished
Neolith Nanotech Polished is designed to achieve the same glossy finish as the original Neolith Décor Polished without the need for the additional glass layer. Neolith Nanotech Polished is processed by directly polishing the slab using a special raw material during the sinterization process and a studied polishing technique. This type of finish outstands for its flexural strength, its higher resistance to abrasion in comparion Neolith Décor Polished and it is ideal for fullbody designed slabs. Thanks to the unique raw materials involved in the process Neolith Nanotech Polished provides the whitest white and darkest black options available in the market of sintered surfaces.
Recommended use:
→ Countertops
→ Interior & Exterior Cladding
→ Interior Flooring (low foot traffic)
Neolith Natural Honed
Finishes
Neolith Natural Honed
Neolith Natural Honed is a honed texture which is typical of natural stones: smooth, soft, shine-free and completely matte.
Recommended use:
→ Countertops
→ Interior & Exterior Cladding
→ Interior Flooring (low foot traffic)
Neolith Satin
Finishes
Neolith Satin
Neolith Satin finish features a natural matte look and a regular texture conferring high resistance properties to the material. Highly resistant, completely matte finish ideal for commercial applications.
Recommended use:
→ Countertops
→ Interior & Exterior Cladding
→ Interior & Exterior Flooring (high and low foot traffic suitable)
→ Sinks (high impact or scratches)
Neolith Silk
Finishes
Neolith Silk
Neolith Silk finish features a matte look with a thin layer of glaze that provides subtle shine and a soft touch. This finish is created by applying Neolith Airless Pistol (NAP) Technology Spray to the slab. The result is a silky texture with an extra layer that helps prevent stains and makes cleaning easier.
Recommended use:
→ Countertops
→ Interior & Exterior Cladding
→ Interior & Exterior Flooring (high and low foot traffic suitable)
→ Sinks (high impact or scratches)
Neolith Slate Finish
Finishes
Neolith Slate Finish
NEOLITH SPECIAL FINISHES
Neolith Slate Finish creates the delusion of stratum on the surface. Available now in Neolith Mar Del Plata.
Polished
Finishes
Polished
Polished finish is the most characteristic finish, achieving an inimitable effect reflecting light and objects like a mirror. The material is buffed to a degree of high shine, enhancing a rich look and a pinnacle of the material’s depth and colour.
Neolith Riverwashed
Finishes
Neolith Riverwashed
Neolith Riverwashed finish features depth and surface roughness (rugged texture). Compared to a brush hammered or aged finish and adds a touch of realism inspired by natural stones.
Recommended use:
→ Countertops
→ Interior & Exterior Cladding
→ Interior & Exterior Flooring (high and low foot traffic suitable)
Rigato
Finishes
Rigato
Rigato is a machine finish that gives a linear pattern cut to the stone. This give an added design factor when applied to a wall. All stones can have this finish prepared on it.
Rockfinish
Finishes
Rockfinish
SPECIAL FINISH
Split-like finish and natural rock reproducible on marble slabs giving a softened effect by brushing the surface without loosing three-dimensionality.
→ For outdoor use
→ Wall applications
→ Soft to the touch
Sandblasted
Finishes
Sandblasted
In sandblasting, a high-pressure jet of siliceous sand or steel shots is applied to the area to be treated. It produces a smooth abrasion, leaving the material slightly scratched on the surface, but not rugged. The color tones and the veins are a bit dulled.
Split Face
Finishes
Split Face
Split Face finish occurs whenthe stone is cut by a Guillotine that fractures the face and turns it to a rocky finish. This finish has textured relief look that provides dimension with added quality and durability.
Tranche
Finishes
Tranche
SPECIAL FINISH
Inspired by a wood finish with a crossed processing effect.
→ For indoor use
→ Soft to the touch
Vintage
Finishes
Vintage
Our exclusive Vintage finish blends in well with both modern and antique designs and its appearance is both eye catching and durable. A finish that appears to have a nice PATINA, and is the only Finish we can recommend and can be used in a kitchen environment !!!
Wood
Finishes
Wood
SPECIAL FINISH
A processing technique that recalls the grain of brushed wood.
→ For indoor use
→ Low maintenance, easily washable
→ Recommended on marble, compact granites, quartzites & agglomerates.
Wen-PEC
Finishes
Wen-PEC
SPECIAL FINISH
A finish that creates a brushed wenge effect, soft, pleasent to the touch and unique furnishing characteristics.
→ Outdoor & Indoor use
→ Depending on customer’s preference both strong & soft brushing is available.
